Professional Solution Provider for Iron and Steel Industry -- Zitai New Material

Precautions when using color coated panels


Release time:

2023/10/30

The color coated board should be installed with fixings and fixed to the purlin with self-tapping screws, and there should be fixings on each purlin.

Precautions when using color coated panels

  1. The color coated board should be installed with fixings and fixed to the purlin with self-tapping screws, and there should be fixings on each purlin.

  2. Place a piece of color coated plate on the fixing piece, then press it against the bottom groove of the center rib and inner rib of each fixing piece to make it fully engaged.

  3. Steel pipe x 3M scaffolding is used to set up 2 x 4m long pipes, with 4 wheels on each scaffolding for ease of advancement.

  4. Color-coated panels should be installed on the inner layer of the roof first.

  5. According to the technical requirements, each crest is fixed with 30mm long special self-tapping screws, and the nut color is the same as the color plate color.

  6. Lay insulating cotton and seal the insulating cotton joints with special tape.

Related News

Reasons affecting color coated galvanized sheet and storage methods

Reasons affecting color coated galvanized sheet and storage methods

Color coated galvanized sheet in daily life has been widely used in different areas and different parts of use, using the same amount of galvanized color galvanized sheet, its service life will be very different, so for different situations, in the treatment up is also different, so what is the cause of it, let's next come together to understand it.

2023-10-30

How printing plate trimming works

How printing plate trimming works

When encountering the situation that the size of the printing plate is not suitable, we can use the trimming way to change the size, and trimming is also relatively simple. Although this operation is said to be simple, but also need to be carried out under the premise of the correct operation, here we come to a specific introduction to its trimming should be how to operate?

2023-10-30

Printed color steel plate surface without luster reasons and treatment methods

Printed color steel plate surface without luster reasons and treatment methods

Printed color steel plate surface are more glossy, and cause no luster reason is various, we should pay attention to the production and processing time to find the cause of no luster reason and solve the problem, otherwise the use of the product will be affected to some extent, the following to give you an introduction to the surface of the plate no luster reason and processing method.

2023-10-30

Learn More Details